Skip to content

F0086 siz-1

Rule: Flash and RAM regions stay under a fill limit.

Code F0086 (stable, never reused)
Id siz-1
Category siz
Source spirit_level
Fix by hand
Needs the firmware's linked ELF (--elf); skipped without a firmware binary

Level per tier

Tier Level Reason
small off
small-workspace off
medium off
big off
ai off
embedded warn bedrock warning: Flash or RAM use over a threshold (default 90 % of the region) in a shipped profile
ui off
egui off
units-strict off
units-paranoid off

Parameters

Name Type Default Meaning
region-percent integer 90 percent of a memory.x region in use above which it is reported

Why

A shipped build whose flash or RAM use is over a threshold (default 90 %) of its region, read from the linked ELF.

Past 90 % there's little headroom left for the next feature, the next dependency bump, or a safety margin the project may need for things like stk-6's stack budget; finding this out at 99.6 % full, mid release, leaves no room to fix it quickly.

Example

Vb135 PLAT-7, and typec_dongle at 99.6 % flash — both found after the fact rather than caught by a budget check at build time.

How to fix

Nothing automatic — this check exists to surface the number early; reducing use is siz-4 through SIZ-9's job, or the budget needs raising (a bigger part, or dropping --settings/--bootloader headroom elsewhere).

How it is checked

elf easy: sum section sizes per memory region from the linked ELF and compare against the region's size.

Source

Ported from embedded_bedrock's firmware check catalogue, SIZ-1 (book/checks.md, detail in book/checks/siz.md). Found on: internal firmware playbook; vb135 PLAT-7; typec_dongle (99.6 %).

Configure

[lints.siz-1]
level = "deny"
region-percent = 90
reason = "why this project wants it at this level"

Allow one finding in the code with // spirit-level: allow(siz-1) <reason> (waivers); the code works there too, as in [lints.F0086].